Silent Water Transfer Pumping Experts
Lower Mainland of BC as well as other populated area within major cities or sound sensitive areas in remote environmentally sensitive areas are demanding Sound Attenuated pumps and Equipment Sound Attenuation.
Again, Canadian Pumps Solutions was called in the provide Echo Barrier sound absorbing panels as the best option to achieve the required sound reduction on a new sewer bypass project in a large Canadian city.
The Echo Barrier product is always available through CANADIAN PUMP SOLUTIONS to the market as an option for low sound, privacy fencing and light control CANADIAN PUMP SOLUTIONS has also been very successful in urban settings achieving the mandated lower decibel requirements using Selwood super silent pumps. Richmond BC has some of the strictest requirements in Canada not only for water transfer and water treatment, but sound mitigation is also a strict requirement. Canadian Pump Solutions has worked with one of our key customers NCS Fluid Handling Systems for the past year on a major sewer bypass project in Richmond with he success incorporating silent pumps such as the Selwood Super Silent Pump as well as Canadian Pump Solutions Echo Barrier panels.
With the in-house ability to professionally engineer sound reduction solutions and integrate this sound attenuation into our sewer bypass projects. CANADIAN PUMP SOLUTIONS can immediately serve contractors, service companies and municipalities on planned upgrades or emergency response to repair existing sanitary system lines.
When the decision is made to perform sewer rehabilitation, it is typically to replace aging or insufficient pipelines. The solutions require that the waste products be diverted, and a temporary system is put in place. CANADIAN PUMP SOLUTIONS designers accomplish this by deploying sound attenuated pumps to temporarily bypass piping and valves upstream from the sewer pipes that will be replaced and then to re-enter the sanitation system downstream of where the work is being performed. The size of the system is calculated based on peak flow which varies depending on the number of homes and businesses along the section of a line. The amount of waste material moved can exceed thousands of liters per minute!
CANADIAN PUMP SOLUTIONS designers have years of systems design and experience, which is needed when properly sizing the pumps. Since the amount of waste material required to be bypassed varies from time to time throughout the day, the temporary system must accommodate this changing flow. Typically, the peak is calculated using flow meters, and peak flow is usually early in the morning and again in the evening when residents return home. This design calculation of peaks is crucial to the project success. If the flow is not calculated correctly and the system is undersized, the pumps or piping may not be able to keep up and sewage spill may be the result, which leads to many problems for everyone.
Sound calculations are only a part of the overall operational considerations that CANADIAN PUMP SOLUTIONS designers review.
Other considerations include:
Are there municipal noise ordinances?
Road access - CANADIAN PUMP SOLUTIONS offers engineered road crossing to accommodate traffic flow and 24-hour system monitoring by specially trained technicians in system setup and operation.
In today's market, a sewer system upgrade project may be an open cut replacement or a trenchless lining technology rehabilitation, but the one thing that won’t change with any rehabilitation is the need for a properly designed bypass system that incorporates the proper pumps, piping, and support equipment.
Learn more about how CANADIAN PUMP SOLUTIONS complete sewage bypass services and equipment can be perfectly adapted to your project or contact us for a sewer bypass service quote.